Top | |
Wood Species: | Maple |
Pieces: | 2 |
Grade: | A |
Binding: | None |
Back | |
Wood Species: | Mahogany |
Pieces: | 2 |
Density: | Medium |
Binding: | None |
Weight | |
Weight Relief: | Ultra-Modern |
Average Weight (body only): | 4lbs. 6.7oz |
Materials Used | |
Glue: | Franklin Titebond 50 |
Tonal, Resonant, and/or Technical Effect: | Sculpted Fast Access Heel |
Body Contour | |
Carve: | Classic |
Neck | |
Wood Species: | Mahogany |
Pieces: | 1 |
Details | |
Truss Rod: | Les Paul |
Profile: | Slim taper |
Thickness at Fret 1: | .800" |
Thickness at Fret 12: | .875" |
Average Weight: | 1 lbs 2.0 oz |
Peg Head | |
Type: | SP1-B |
Inlay: | Mother of Pearl |
Peg Head Binding: | None |
Silkscreen: | Gold "Les Paul Model" |
Headstock Angle: | 17 degrees |
Neck Fit | |
Joint Angle: | 5.0 degrees |
Joint Angle Tolerance: | 0 deg 0 min 15 sec |
Type: | Mortis and Tenon |
Adhesive: | Franklin Titebond 50 |
Gauges Used: | Pitch Height Gauge |
Nut | |
Style: | Zero Fret Nut |
Material: | Titanium |
Width: | 1.745" |
Slots: |
A: 0.048" D: 0.038" G: 0.028" B: 0.019" e: 0.014" |
E: 0.058"
Fingerboard | |
Wood Species: | Rosewood |
Pieces: | 1 |
Shade: | Dark |
Fingerboard Details | |
Radius: | 12" |
Frets: | 22 |
Nut/End of Board: | 1.745" @ nut, 2.310" @ end of board |
Scale: | 24.75" |
Binding: | None |
Side Dots (Color): | White |
Fingerboard Inlays | |
Style: | Trapezoid |
Material: | Mother of Pearl |
Dimensions: | Large - 0.66" x 1.17" Small - 0.24" x 1.56" |
Average Weight: | 4.16 oz |
Color Code: | B6 |
Surface Texture: | 90 Sheen |
Filler: | Walnut |
Sealer: | 1.5 - 2 mils |
Top: | Black Cherry Burst |
Top Coat: | Hi Gloss Lacquer / 90 Sheen, 7-8 mils |
Scraped: | Fingerboard and Nut |
Color Code: | WR |
Surface Texture: | 90 Sheen |
Filler: | Walnut |
Sealer: | 1.0 - 1.5 mils |
Top: | Wine Red |
Top Coat: | Hi Gloss Lacquer / 90 Sheen, 7-8 mils |
Scraped: | Fingerboard and Nut |
Color Code: | EB |
Surface Texture: | 90 Sheen |
Filler: | Walnut |
Sealer: | 1.5 - 2 mils |
Top: | Ebony |
Top Coat: | Hi Gloss Lacquer / 90 Sheen, 7-8 mils |
Scraped: | Fingerboard and Nut |
Pickups | Rhythm | Lead | |
---|---|---|---|
Style: | 490R | 498T + | |
Winds/Coil: Screw side/Slug side: | 5250 / 5250 | 7200 / 7200 | |
Material of Wire (gauge): | Copper (42) | Copper (43) | |
Coil Dimensions (per coil): | 2.61 x 0.68 inches | 2.61 x 0.68 inches | |
Coil Material: | ABS | ABS | |
Coil Winding Process: | Machine Wound | Machine Wound | |
Pole Piece Material: | Nickel | Nickel | |
Pole Piece Position from Nut: | 18 5/8" | 23.4375" | |
Slug Material: | Nickel | Bare Steel | |
Slug Dimensions (diameter x length): | 0.187 x 0.489 inches | 0.187 x 0.489" | |
Magnet Material: | Alnico #2 (smooth) | Alnico V | |
Magnet Position from Nut: | 19" | 23.125" | |
Magnet Dimensions: | 2.5 x 0.5 inches | 2.32 x 0.5" | |
Polarities: | Screw side is the south pole of magnet | Reversed Polarity | |
Cover: | Chrome | Chrome | |
Qfactor: | 5.62 | 4 | |
ResistanceDC: | 7803 Ohms | 14580 Ohms | |
Resonant Frequency: | 2715.71 Hz | 2373.69 Hz | |
Tonal & Resonant Advancements: | Better Hum canceling w/rev polarity Better Hum canceling w/rev polarity |
Control Pocket Assembly | Lead Volume | Rhythm Volume | |
---|---|---|---|
Type: | 500K Non-Linear | 500k Non-Linear | |
Peak Voltage: | 500V | 500V | |
Range: | 0-500K | 0-500K | |
Power Rating: | 1/4 watt above 100K ohms | 1/4 watt above 100K ohms | |
Resistance Tolerance: | +/- 20% | +/- 20% | |
Minimum Resistance: | 200 ohms | 200 ohms | |
Lead Tone | Rhythm Tone | ||
Type: | 500k Non-Linear | 500k Non-Linear | |
Peak Voltage: | 500V | 500V | |
Range: | 0-500K | 0-500K | |
Power Rating: | 1/4 watt above 100K ohms | 1/4 watt above 100K ohms | |
Resistance Tolerance: | +/- 20% | +/- 20% | |
Minimum Resistance: | 200 ohms | 200 ohms | |
Capacitors: | Lead Value | Rhythm Value | |
.022uF | .022uF |
Switchable Functions | |
---|---|
Neck Pickup: | Tap or Split |
Bridge Pickup: | Tap or Split |
Neck Volume: | High Pass Filter Out in In Circuit |
Bridge Volume: | High Pass Filter Out in In Circuit |
Transient Suppression: | Out or In Circuit |
Tuning Keys | |
---|---|
Style: | Grover Locking Kidney |
Material: | Chrome |
Weight: | 1.5 oz |
Tuning Keys Details | |
Tuning Ratio: | 18:01 |
Gear Type: | Worm |
What is allowable turn: | +/- 4 degrees |
Plating specs: | Chrome |
Part numbers: | 430-15851 / 52 |
String Dimensions | |
E: | 0.046" |
A: | 0.036" |
D: | 0.026" |
G: | 0.016" |
B: | 0.011" |
e: | 0.009" |
Bridge | |
Style: | Tune-o-matic |
Material: | Aluminum |
Plating Specs: | Chrome |
Part number: | 430-14450 |
Weight: | .96 oz |
Dimensions of String Slots | |
---|---|
E: | 0.058" |
A: | 0.048" |
D: | 0.038" |
G: | 0.028" |
B: | 0.019'' |
e: | 0.014" |
Tailpiece | |
Style: | Stop Bar w/ Locking Studs |
Compensated: | No |
Material: | Aluminum |
Plating Specs: | Chrome |
Part number: | 430-14451 / 430-14451 |
Weight: | 1.12 oz |
Output Jack | |
Style: | 1/4" mono gold plated positive contact |
Jack Plate | |
Style: | Les Paul Square |
Material: | Chrome |
Part Number: | 430-19467 |
Weight: | 0.21 oz |
Strap Buttons | |
Material: | Aluminum |
Plating Specs: | None |
Part numbers: | 430-19160 / 60E |
Weight: | 0.14 oz. |
Pick Guard | |
---|---|
Style: | Les Paul |
Part Number: | 430-12093 |
Truss Rod Cover | |
Style: | Black/White bell, Stamp "Standard" |
Part Number: | 430-19398 |
Knobs | |
Style: | Amber Top Hat |
Part Number: | 430-19631 |
Dial Pointers | |
Yes/No: | No |
Control Plate(s) (Backplate Cover) | |
---|---|
Style: | SS infused polycarbonate for ESD protection |
Part Number: | 380-12209 |
Control Plate(s) (SwitchPlate Cover) | |
Style: | SS infused polycarbonate for ESD protection |
Part Number: | 380-12211 |
Switch Washer | |
Style: | None |
Part Number: | n/a |
Trim Rings | |
Style: | Cream Humbucker Low/High |
Part Number: | 430-13894 / 430-13893 |
Case | |
---|---|
Style: | HP Hard Shell |
Color: | Aluminum |
Strap Locks: | None |
Tools: | Gibson USA Multi-Tool, Gibson USA Premium Strap, Gibson USA Polishing Cloth |
Manual: | Gibson USA's owners |
COA/Other: | None |